1.Pre-Operation Inspection
Check all fasteners, pipe joints, and hydraulic lines on your Hengwang compact loader. Ensure no looseness, deformation, or damage exists to maintain structural integrity.
2.Hydraulic Pump Priming
Always fill the hydraulic pump with oil before initial startup. Dry operation is strictly prohibited to prevent component wear.
3.System Activation Protocol
Start the hydraulic pump in no-load mode. Confirm smooth operation with abnormal noise-free performance before commencing work.
4.Pressure Regulation
Adjust the hydraulic control valve immediately if working pressure exceeds or falls below specified thresholds.
5.Real-Time Monitoring
During operation, continuously observe:
6.Oil temperature, pressure levels, and unusual sounds
1）Cylinder/motor motion stability
2）Valve responsiveness
3）Oil leakage points
4）Excessive vibration patterns